Honeywell CentraLine EAGLEHAWK NX User Manual page 25

EAGLEHAWK NX CONTROLLER
5. Turn the rotate&push button to navigate to and highlight the desired
datapoint.
6. Push the rotate&push button. The datapoint details display.
7. Turn the rotate&push button and select the Manual line with the checkbox
symbol.
8. Push the rotate&push button. The Manual checkbox is checked.
9. Turn the rotate&push button to navigate to the value and set the value as
described in the "Adjusting and Saving Values and Options" section, p. 19.
25
BASIC OPERATION PROCEDURES
EN2Z-1053GE51 R0119