Replacement Parts - Weil-McLain EcoTec 80 Manual

G -
®
ECO Tec
AS FIRED WATER BOILER

Replacement parts

DO NOT SERVICE THE
BOILER WITHOUT A
MAINTENANCE KIT
AVAILABLE
The maintenance kit includes components that may
have to be replaced when accessing or disassembling
parts of the boiler. Failure to replace damaged
components and to use only the parts specifically
intended for the boiler can result in severe personal
injury, death or substantial property damage. See
Figure 125, page 137 for part number.
REPLACEMENT PART
NUMBERS
Weil-McLain Boilers and
Controls Repair Parts Lists.
WHEN OPERATING THE
BOILER ON PROPANE GAS
ECO Tec
Propane conversion kits and instructions
80/110 510-811-415
150 510-811-416
199
510-811-417
136
–
.
See
page 14.
See
page 14.
See
page 14.
B
80/110/150/199
OBTAIN PARTS ONLY THROUGH
WEIL-McLAIN
Replacement parts must be purchased through a local Weil-
McLain distributor. When ordering, specify boiler model and size
and include description and part number of replacement part.
Results from using modified or other manufactured parts will
not be covered by warranty and may damage boiler or impair
operation.
THE BOILER CONTAINS CERAMIC
FIBER MATERIALS
handling these materials per instructions on page 106 of this
manual. Failure to comply could result in severe personal injury.
REINSTALL Jacket door
Inspect boiler jacket door gaskets on front of cabinet and reinstall
boiler jacket door after start or servicing. The boiler jacket door
must be securely fastened to the boiler to prevent boiler from
drawing air from inside the boiler room. This is particularly
important if the boiler is located in the same room as other
appliances. Failure to keep the jacket door securely fastened could
result in severe personal injury or death.
BEFORE SERVICING or MAKING
CONNECTIONS —
LABEL WIRES BEFORE REMOVING
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause
improper and dangerous operation.
M
OILER ANUAL
. Use care when
Part number 550-100-260/0520