Huawei U626 User Manual page 23

phone will switch off automatically.
When you charge the battery with your phone powers on, the battery level icon
appear on the upper right corner of your phone screen. In battery charging, the vertical
bars of the icon will blink continuously. When the vertical bars fill up the whole icon and
the icon stops blinking, it indicates that the charging is completed.
During charging with your phone powers off, a cylinder icon indicating the power level
of the battery will appear on the screen and will blink continuously. When the cylinder is
filled and stops blinking, it indicates that the charging is completed.
Charging with a Cable Charger
Before charging the battery with a cable charger, please make sure that the battery has been
properly loaded into your phone.
To charge the battery:
1 Plug in the connector of the charger into an electrical outlet.
2 As shown in the following figure: Insert the plug of the charger into the connector of the
phone. Before the insertion, please check whether the arrow on the charger output jack
points to the front side of the phone.
3 After charging, please pull out the charger plug from the AC socket at first, and then
press and hold the gray buttons on the two sides of the charger output jack and pull out
the charger plug from the phone.
2 Getting Started
will
13
HUAWEI