About The Switch; Summary Of Hardware Features - 3Com SuperStack 3 3226 Getting Started Manual

12 C 1: I
HAPTER NTRODUCING THE

About the Switch

Summary of
Hardware Features
S S 3 S
UPER TACK WITCH
The Switch is a 10/100 Mbps Ethernet Switch, which consists of either:
24 10BASE-T/100BASE-TX ports or
48 10BASE-T/100BASE-TX ports
and:
Two 10BASE-T/100BASE-TX/1000BASE-T (10/100/1000) ports
Two SFP ports
The two 10/100/1000 ports are combination ports. When an SFP module
is inserted it has priority over the 10/100/1000 port of the same number
(25-26 on the Switch 3226, 49-50 on the Switch 3250). The
corresponding 10/100/1000 port is disabled when an SFP module is
present.
Table 3 summarizes the hardware features that are supported by the
Switch.
Table 3 Hardware features
Feature
MAC Addresses
Auto-negotiation
Auto MDI/MDI-X
Forwarding Modes
Duplex Modes
Traffic Prioritization
Ethernet/Fast Ethernet
Ports
Ethernet/Fast Ethernet/
Gigabit Ethernet Ports
RPS Support
SFP Ports
Mounting
3226 S 3250
AND WITCH
Switch
Up to 8000 supported
Up to 200 static entries
Supported on all ports
Supported on all ports
Store and Forward
Half and full duplex on all ports
Supported (using the IEEE Std 802.ID, 1998 Edition):
4 queues per port
Auto-negotiating 10BASE-T / 100BASE-TX ports
Auto-negotiating 10BASE-T / 100BASE-TX /
1000BASE-T ports
Connects to SuperStack 3 Advanced Redundant
Power System (ARPS) (3C16071B) with Type 3
Module (3C16075)
2 auto-negotiating SFP ports
19-inch rack or stand-alone mounting