Changing Default Passwords - 3Com SuperStack 3 3226 Getting Started Manual

44 C 3: S
HAPTER ETTING
Changing Default
Passwords
U M
P FOR ANAGEMENT
CAUTION: To protect your Switch from unauthorized access, you must
change the two default passwords as soon as possible, even if you do not
intend to actively manage your Switch
Table 9 Default Users
User Default
Name Password Access Level
monitor monitor
admin (no
password)
Use the admin default user name (no password) to login and carry out
initial Switch setup.
You can change the default passwords using either:
The gettingStarted command on the CLI, or
The Security > Device > User > Modify operation on the web interface.
For more information about default users and passwords, refer to the
"Switch Management Interface Reference Guide" on the Switch
CD-ROM.
monitor — the user can view all manageable parameters,
but cannot change any manageable parameters
security — the user can access and change all manageable
parameters