Selecting an Image Source
USB port sources (USB-B port and external devices connected to the
C
USB-A ports)
Network source (LAN and Screen Mirroring)
D
• Press the [Home] button on the control panel or remote control.
Then select the source you want to use from the screen displayed.
• The display order of the input sources changes when the
projector detects an input signal. (The detected input source
appears in the upper left position.)
a
• A check mark appears on the image from the current input
source. You can check a preview of the current input image
for most sources as a thumbnail (other than the USB input
source in Content Playback mode).
• If there are more than nine available input sources, your
desired source may appear on the next page. Select the right
arrow to move to the next page.
63