Table of Contents
Advertisement
Controlling a Networked Projector Using a Web Browser
You cannot change the following settings using Epson Web Control.
• EDID (EB‑L255F/EB‑L250F)
a
• HDMI Link
• HDMI EQ Setting
• Fixed Installation
• Pattern Display
• Split Screen Setting
• Content Playback (EB‑L255F/EB‑L250F)
• User Button
• User's Logo
• User Pattern
• Wireless LAN Diagnosis
• Language
• Search Access Point
• Crestron Connected
• Event ID
• Antenna Level
• ECO menu
• Reset Network Settings
• Firmware Update
You can select the following settings only with Epson Web Control.
• Monitor Password (up to 16 alphanumeric characters)
a
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for 80
[default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000,
10001, 41794)
Remote (only in Content Playback mode)
Options on the Remote screen allow you to select the input source, control
the projector, and start projecting playlists.
Returns to the Epson Web Control screen.
A
Turns the projector on or off.
B
Selects the input source. (The available sources vary depending on your
C
projector model.)
Turns the video and audio on or off temporarily.
D
149
Advertisement
Table of Contents
