Rear Panel; Home Network Gateway - Rear Panel - 3Com HomeConnect 3CRWE50194 User Manual

2 Home Wireless Gateway
Table 1 Front Panel LEDs
LED Description
Power The Power indicator LED informs you when the gateway is on or off. If this
light is on, the gateway is on; if it is not on, the gateway is off. During
firmware upgrades and resets, this light will blink yellow (see "Update
Firmware" on page 36).
WAN This light indicates the state of your Internet connection. When on, the WAN
light indicates that the gateway is connected to the Internet through your
external cable or DSL modem. When the WAN light is off, the gateway does
not have an active connection to the Internet.
Wireless This light displays the state of your wireless connection. If the light is blinking
rapidly, a connection is established with an associated wireless client. If the
light is blinking slowly, no wireless client is associated with the gateway.
LAN These three lights (one per port) display the state of your Ethernet
connections. If the light is on, that port is connected to your Ethernet
network. If the light is off, the port is not connected to your Ethernet
network.

Rear Panel

The rear panel (Figure 6) of the gateway contains four ports, a reset switch,
and a power adapter socket.
Figure 6 Home Network Gateway - Rear Panel
6V
_
+
8
Reset Cable/DSL 1X 2X 3X