Graco B Series Instructions-Parts List Manual page 24

NOTE: Refer to Fig. 24.
1. Remove the engine. See page 23.
2. Loosen the setscrews (16). Unplug the wiring
harness (69) from under the engine mounting
plate. Pull the field out to expose the black and
white wires.
3. Pull the caps (A) off the wire screws (57) in both
places on the field. Loosen the screws and release
the wires of the harness (69).
4. Go to Reassembly, page 26, Step 4.
24 308269
Field and Wiring Harness
16
57
69
A
Fig. 24
0046