3Com 3012 Command Reference Manual page 92

3Com Router Command Reference Guide Addendum for V1.2
information of SPI on all the SPID-supported BRI interfaces. You may view one
interface by specifying its type and number.
Example
Display the related information of SPID on the NI-supported interface bri 0/0/0.
[3Com] display isdn spid interface bri 0
Interface bri 0/0/0:
SPID Type: AUTO
SPID B1:
SPID Num 124345
Neg State SPID_ASSIGNED
Init State INIT_NULL
SPID B2:
SPID Num 45645754
Neg State SPID_ASSIGNED
Init State INIT_NULL
SPID timer: 30 seconds
SPID resend: 2
Table 6-1 Description of the SPID parameters
SPID Type
SPID B1
SPID Num
Neg State
Init State
SPID B2
SPID timer
SPID resend
6.6 isdn ignore dchan
Syntax
Isdn ignore dchan
undo Isdn ignore dchan
Item
SPID Type, which can be NIT, STATIC (having only the L3 initialization
process), or AUTO (including both the negotiation and the L3 initialization).
SPID value of the BRI interface B1 channel. It can be a static configuration or
the result of a dynamic negotiation, all depending on the specified SPID Type.
SPID value of the BRI interface. It can be a static configuration or the result of a
dynamic negotiation, depending on the specified SPID Type.
Negotiation state of the SPID, which can be SPID_UNASSIGNED,
ASSIGN_AWAITING_SPID, SPID_ASSIGNED,
ASSIGN_AWAITING_CALL_CLEAR.
Initialization state of the SPID, which can be INIT_NULL, INIT_IND,
INIT_PROCEEDING, INIT_END, INIT_AWAITING_CALL_CLEAR.
SPID value of the BRI interface B2 channel. It can be a static configuration or
the result of a dynamic negotiation, depending on the specified SPID Type.
Duration of the timer TSPID
SPID message retransmission times
92
Description