3Com 3012 Command Reference Manual page 30

3Com Router Command Reference Guide Addendum for V1.2
Example
Configure precedence value to 6 to identify packets.
[3Com] qos policy 3Com
[3Com-qospolicy-3Com] qos-class database
[3Com-qospolicy-c-3Com database] remark ip-precedence 6
1.30 wfq
Syntax
wfq [ queue-number total-queue-number ]
undo wfq
View
Policy-class view
Parameter
total-queue-number: Number of fair queue, which can be 16, 32, 64, 128, 256, 512,
1024, 2048 and 4096 and the default value is 64.
Description
Using wfq command, you can configure the default-class to use WFQ. Using undo
wfq command, you can delete the configuration.
This command is available for default-class only. In addition, it can be used in
cooperation with queue-length or wred.
For the related command, see qos policy, qos-class.
Example
Configure WFQ for default-class and the queue number is 16.
[3Com] qos policy 3Com
[3Com-qospolicy-3Com] qos-class default-class
[3Com-qospolicy-c-3Com default-class] wfq queue-number 16
1.31 wred
Syntax
wred [ ip-dscp | ip-precedence ]
30