3Com 3012 Command Reference Manual page 36

3Com Router Command Reference Guide Addendum for V1.2
Using debugging hwtacacs authentication command, you can display the
authentication information and the authorization state of the current users. If the
command is not configured with any argument, the information of all the users will be
displayed. If the argument user has been configured, only the authentication
information of the specified user will be displayed. If only the argument interface has
been defined for the command, only the user authentication information on the
interface will be displayed. If only packet has been defined for the command, only the
TACACS+ packets received and transmitted on the router will be displayed.
Example
# Enable AAA authentication debugging.
[Router] debugging hwtacacs authentication
2.2 display hwtacacs accounting
Syntax
display hwtacacs accounting [ verbose ]
View
All views
Parameter
verbose: Display the detailed accounting information of AAA users. If this argument
has been configured, the information sorted by user type will be displayed in addition
to other information.
Description
Using display hwtacacs accounting command, you can display all accounting
information.
The display hwtacacs accounting command can be used to display all the events
on which accounting can be made. Executing this command will display all the active
accounting records, user names, names of the interfaces used by the users, the ID,
and type and duration (including the abbreviation of the time zone) of each
accounting session, as well as the service type. In addition, the length of the current
accounting queue will also be displayed.
For related command, see reset accounting statistics.
36