Clock Display - Kenwood KRC-478R<u>/RV</u> Instruction Manual

the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
4
Press the AUD button to end the control mode.
"EC"/"dB" : Recalling the kenwood preset sound setting
Press the preset buttons (#1-5).
Settings: #1;FLAT, #2;ROCK, #3;POPS/TOP40, #4;JAZZ,
#5;EASY
NOTE
You can call the following settings with this function; bass centre
frequency, bass level, bass quality factor, bass extension, treble
centre frequency, and treble level setting.
"BAS" : Adjust the bass level.
Setting values: - 8 – + 8
"TRE" : Adjust the treble level.
Setting values: - 8 – + 8
"BAL" : Adjust the balance level.
Setting values: Left 15 – Right 15
"FAD" : Adjust the fader level.
Setting values: Front 15 – Rear 15

Clock display

Turning clock display On/Off:
Each time you press the CLK button, the display switches
between the clock and each mode display.
— 7 —