transmit level indicator lights up in the display.
"APPROVED" is displayed, and the Mask Key function activates.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON
The vehicle engine turns ON.
"TRANSMIT 1" is displayed.
2
Enter the Mask Key's signal
Repeat steps 4 and 5 abobe, and enter the Mask Key's signal.
"APPROVED" is displayed.
The unit can be used.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"
Manual Clock Adjustment
This adjustment can be done when the <Synchronize Clock> (page
25) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
Setting
Beep is heard.
Beep canceled.
— 25 —
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Synchronize Clock
Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.
Selectable Illumination
Selecting the button illumination color as green or red.
Display
Setting
"Button Green"
The illumination color is green.
"Button Red"
The illumination color is red.
Setting
Synchronizes the time.
Adjust the time manually.