External Amp Control; Dual Zone System; Manual Open Button Setting; News Bulletin Function With Pty News Timeout Setting - Kenwood KRC-PS978R Instruction Manual

Cassette receiver
Hide thumbs Also See for KRC-PS978R:
Table of Contents

Advertisement

Menu settings

External Amp Control

Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting:
"AMP BAS/AMP BASS FLT" : Bass boost level is flat.
"AMP BAS/AMP BASS +6" : Bass boost level is low (+6dB).
"AMP BAS/AMP BASS +12" : Bass boost level is high (+12dB).
NOTE
As of December 1999, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
Function of the KRC-PS978R/KRC-878R

Dual Zone System

The following operation allows separate sound sources to
control the output of the front and rear speakers. The Dual
zone system can only be switched on or off when the source is
set to the AUX mode.
Display and setting:
"Zone 2 ON" : The dual zone system function is on.
"Zone 2 OFF" : The dual zone system function is off.
NOTE
• You must purchase the optional KCA-S210A/CA-C1AX/KDC-
CPS82/KDC-CX82/KDC-CPS85/KDC-CX85 device before you can
use this function.
• You can choose to send the AUX input through the rear
channel, and the unit's tuner or tape source through the front
channel.
• The Bass, Treble and Loudness adjustments do not affect the
rear channel.
• When the Dual zone system is turned on, the External disc
control features cannot be used.
• When you set the Dual zone system to on whilst the non-fading
preout is switched on, the sound of the non-fading preout does
not be outputted.

Manual Open Button Setting

By pressing the button hidden behind the upper left part of the
faceplate during forced closing, you can open the faceplate.
Follow the directions below to preset the number of times that
this button needs to be pressed in order to open the faceplate.
Display and setting:
"OPEN SW 1" – "OPEN SW 3"
NOTE
The initial setting value is "1" .
News Bulletin Function
with PTY News Timeout Setting
You can arrange to have news bulletins interrupt your current
listening source, including other radio stations. When the
News Bulletin function is on, the PTY News Timeout setting
allows you to set the interval during which further news
interruption cannot take place. You can adjust the PTY news
interruption period from 10 to 90 minutes for each journey.
Display and setting:
"NEWS OFF/ 00min/ 10min/ 20min/ 30min/ 40min/ 50min/
60min/ 70min/ 80min/ 90min"
: When you select the news interruption timeout interval, the
News function turns on and the NEWS indicator lights up.
When a news bulletin is received, "NEWS" will be displayed
and reception will begin at the preset volume.
NOTE
• If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is
received.
• This function is only available if the desired station sends PTY-
code for news bulletin or belongs to <Enhanced Other
Network>-Network sending PTY-code for news bulletin.
• If you turn on the news bulletin function in the MW/LW band,
the band is switched automatically to the FM band.
However, the MW/LW band is not returned to when you turn
off the function.
— 34 —
(min= minutes)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krc-878rKrc-778rKrc-778rvCkrc-878r

Table of Contents