Contrast Adjustment; Dimmer; External Amp Control - Kenwood KRC-579B Instruction Manual

Scan Mode
SRC Mode
(Changing colours depending on the source being played)
Time Mode
(Colour changes every six hours)
Situational Mode off
When the Situational Mode is off, the original colour setting
resumes.
5
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for two seconds or more to enter the
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
6
To store the colour setting in the memory:
(colour preset memory)
After adjusting the illumi colours, press the #5 button for two
seconds to store the colour setting in the memory.
Pressing the #5 button again recalls the stored colours from
the memory.
NOTE
The Blue Adjust mode setting cannot be stored in memory.
7
Press the MENU button to end the Variable Illumination Colour
Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

External Amp Control

Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting:
"AMP Bass FLT" : Bass boost level is flat. (Default setting)
"AMP Bass +6" : Bass boost level is low (+6dB).
"AMP Bass +12" : Bass boost level is high (+12dB).
NOTE
As of December 2000, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
— 29 —
Function of the KRC-V679R/KRC-679R