Installing The Unit - Kenwood KDC-315R Instruction Manual

For KDC-3051RY/ KDC-3051GY
Blue
(Motor antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)

Installing the unit

1
2
Before attaching, make sure
the direction of the
escutcheon is correct. (Wider
hooks on the top side.)
14
Antenna terminal (JASO)
White (+) / White/black (–) : To front speaker (left)
Gray (+) / Gray/black (–) : To front speaker (right)
Green (+) / Green/black (–) : To rear speaker (left)
Purple (+) / Purple/black (–) : To rear speaker (right)
To the antenna control terminal in the vehicle.
To the power control terminal when using the optional power amplifier.
To the terminal that is grounded when either the telephone rings or
during conversation. (To connect the Kenwood navigation system,
consult your navigation manual.)
To the metallic body or chassis of the car
Car fuse box
Connect the wiring harness to the unit. Other wiring
connection has been completed earlier. (page 13, 14)
Bend the appropriate tabs
to hold the mounting sleeve
firmly in place.
Fuse (10 A)
Ignition key switch
Car fuse box
Battery
Dashboard of your car