Basic Operations Power; Switching Modes; Volume; Attenuator - Kenwood KDC-6060R Instruction Manual

Basic operations
(See page 6)
Power
Turning on the power:
Press the SRC button.
NOTE
Turn the power on before carrying out the following procedures.
Turning off the power:
Hold down the PWR OFF button for one second or more.

Switching Modes

Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
CD mode
Disc control mode
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The disc control mode will differ depending on the unit that is
connected.

Volume

Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.

Attenuator

This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
NOTE
Turning down the volume all the way turns off the attenuator
function.

Loudness

This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.
— 9 —