Table of Contents
Advertisement
Disc control features
Presetting Disc Names
Store the names of discs to be displayed when played.
1
Play the disc whose name you want to preset.
NOTE
• This function is not available for disc changers that do not feature
the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for MDs that you record.
2
Hold down the
NAME.S
button for two seconds or more.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
3
4 or ¢ button to move the cursor to the
Press either the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the
+
–
TRACK
or TRACK
buttons, respectively, on the remote
control.
4
Each time the 38 button is pressed, the characters to be
entered change as listed below.
+
–
Press the DISC
or DISC
character.
Characters that can be displayed are as follows.
Alphabet (capital letters) : A~Z
Numerals/characters : 1~9 0 @ " ' ` % &
NOTE
The operation and characters that can be entered may change
as listed below, depending on the unit that is connected.
A press of the 38 button exits the disc name preset mode.
Operations can be followed again from Step 2 at a time such
as this, and the characters to be input are selected using the
procedure described below.
(See page 7)
button to display the desired
+ - = , . / \ < > [ ]
+
Press the DISC
or DISC
character. Besides the alphabet (capital letters only) and
numbers, you can choose the following characters: /, +, –, *,
=, <, >, [ and ].
NOTE
Direct Alphabet Input
If the disc changers that were manufactured and sold after 1997
are connected, you can directly input letters using the
number/letter entry buttons on the remote control.
Example: Use the following table to enter the name "DANCE".
Character
Button to press
"D"
"A"
"N"
"C"
"E"
5
Continue steps 3 and 4 until all the characters are chosen for
the name.
NOTE
You can enter up to 8 characters for each name.
6
Press either the
NAME.S
button on the remote control.
The disc name is stored and the disc name preset mode is
cancelled.
If you make no entry in a 10-second period, the name will be
stored with the characters entered so far.
— 28 —
–
button to display the desired
# Times pressed
#3
1
#2
1
#6
2
#2
3
#3
2
button on the main unit or the OK
Hide quick links:
Advertisement
Table of Contents
