Rack-Mounting the Chassis
1
Step 5
Continue sliding the chassis in until the second pair of handholds are near the rack posts
Figure 17: Sliding the Chassis in - Part 2
1
Step 6
Push in the the second pair of handholds and continue sliding the chassis in until the L brackets make contact
with the rack posts.
Step 7
Secure the chassis to the rack with either the 10-32 or 12-24 pan head screws from the chassis standard
accessory kit.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
62
Handholds closest to the rack posts, pushed
in.
Chassis is slid in until the second pair of
handholds are near the rack posts.
-
-
-
-
Installing the Switch