Removing and Replacing FRUs
To move the clamp in direction 3b, use a flathead screwdriver or similar device and push the clamp latch
down.
Figure 31: Clamp Latch - Detail
you have to push the latch to move it in direction 3b.
Figure 30: Positioning the Clamp
1
2
The end that is fixed to the power supply
module
Clamp Latch
provides a clearer view of the clamp latch and the direction in which
3a
Directions in which the clamp can be moved,
and
towards the power supply and away from it.
3b
-
-
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
Power Cord Retainer Mechanism
107