Temperature Controls and Indicators
Temperature Scale Keys/LEDs
°
F
°
C
Press
or
to change temperature scale.
Heater Zone On/Off Keys/LEDs
Press
to turn heater zones on and off. Also clears
heater zone diagnostic codes, see page 34.
NOTE:
LEDs flash when heater zones are on. The duration of
each flash shows the extent that the heater is turned on.
Temperature Arrow Keys
Press
, then press
perature settings in 1 degree increments.
Temperature Displays
Show actual temperature or target temperature of
heater zones, depending on selected mode. Defaults to
actual at startup. Range is 32-190°F (0-88°C) for A and
B, 32-180°F (0-82°C) for hose.
14
or
to adjust tem-
Circuit Breakers
Located inside Reactor cabinet.
Ref.
Size
CB1
50 A
CB2
40 A
CB3
50 A
CB4
50 A
CB5
20 A
CB1
CB2
CB3
CB4
For wiring and cabling, see repair manual 313540.
Component
Hose/Transformer Secondary
Transformer Primary
Heater A
Heater B
Motor/Pumps
ti9884a
CB5
313539F