Technical Data - Graco Reactor A-20 Operation

Technical Data

Technical Data
Category
Maximum Fluid Working Pressure
Maximum Air Working Pressure
Machine Maximum Power with hose
Voltage Requirement (50/60 Hz)
(230 V Nominal: 195-253 VAC)
(380 V Nominal: 338-457 VAC)
Amperage Requirement (Full Load Peak)*
Maximum Heater Fluid Temperature
Maximum Hose Fluid Temperature
Maximum Ambient Temperature
Maximum Output
Output Per Cycle (A and B)
Overpressure Relief Shutdown
Over Temperature Shutdown (Primary Heater)
Heater Power
Hose Power
Sound Pressure
Sound Power, per ISO 9614-2
Viscosity Range
Maximum Fluid Inlet Pressure
Fluid Inlet/Strainer Filter
Air inlet Filter Mesh
Component B (Resin) Inlet
Component A (Isocyanate) Inlet
Recirculation/Block Hose Connections
Maximum Heated Hose Length***
Height
Width
Depth
Weight
Wetted Parts
Certification
*Full load amps with all devices operating at maximum
capabilities with 210 ft (64.1 m) of hose.
**When a surge transient is applied to the power lines of the unit, heat to the hose may be interrupted and require the
hose heat switch to be manually cycled.
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may
be used, but will have 25% less heat capacity.
34
Data
2000 psi (1.4 MPa, 140 bar)
120 psi (0.84 MPa, 8.4 bar)
9000 Watts
230 V, 1 Phase
230 V, 3 Phase (Delta)
380 V, 3 Phase (WYE 220 V Neutral)
40 amps @ 230 V, 1 Phase
32 amps @ 230 V, 3 Phase
18.5 amps @ 380 V, 3 Phase
190 °F (88 °C)
180 °F (82 °C)
120 °F (49 °C)
20 lb/min. (9.0 kg/min.)
.028 gal/cycle (.105 ltr/cycle)
2250 psi (15.5 MPa, 155 bar)
230 °F (110 °C)
6000 Watts
2790 Watts
86.3 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm)
91.6 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm)
250-1500 centipoise
400 psi (2.7 MPa, 27 bar)
20 mesh standard
5 Micron
3/4 npt(f) swivel
1/2 npt(f) swivel
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
210 ft of 3/8 ID
39.5 in. (1003.3 cm)
27.2 in. (690.9 cm)
25.0 in. (635 cm)
250 lb (117.6 kg)
Carbon steel, stainless steel, chrome, aluminum,
Fluoroelastomer, PTFE, nylon
CE **
311511G