Changing The Transmission Frequency - Kenwood KDC-C510FM Instruction Manual

Changing the transmission frequency

1
To set the frequency change
mode
Hold down the REP button on the
display unit for more than three
seconds.
The FREQ indicator will light up and
the currently set frequency will be
displayed.
F R E Q
NOTE
• The initial value is 88.3MHz.
• If this function is on, the functions
other than power on / off, reset,
and modulation level / dynamic
control, cannot be operated.
• This function is not available when
the random play, repeat play, or
scan play function is on. Before
using this function, cancel the other
functions. This function cannot be
used while loading a disc (while the
play indicator is blinking).
C D A U T O C H A N G E R C O N T R O L L E R
T R A C K
DISC
'
M . R D M D . R E P D . S C N M H z
T R A C K D I S C
4 ¢ -
PWR
2
2
To change the frequency
Press the 4 or 3 button on the
display unit.
The transmission frequency will
change as follows:
87.7MHz
87.9MHz
88.1MHz
M H z
88.3MHz (initial value) 89.3MHz
88.5MHz
88.7MHz
NOTE
Some car radios cannot receive a
87.7 MHz frequency.
To cancel
Hold down the REP button on the
display unit for more than three
seconds.
The FREQ indicator will go off and the
frequency change will take effect.
The frequency change mode is
automatically cancelled if you do
nothing for 15 seconds.
1
REP
RDM
3 8
/
+
89.9MHz
89.7MHz
89.5MHz
89.1MHz
88.9MHz
4
3
19