Function Settings; 10-1.Function Settings On Indoor Unit - Fujitsu AUYG18LVLB Design & Technical Manual

10. Function settings

To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
10-1. Function settings on indoor unit
By using some components on the PC board, you can change the function settings.
Related components on the PC board and the applicable settings
Component
DIP switch
Jumper wire
¢ Component location
Components on the indoor unit main PC board used for the function settings are located as
shown in the following figure.
1
2
3
4
JM1
JM2
JM3
Indoor unit main PCB
- 25 -
Setting content
Remote controller address setting
Setting prohibited