Toshiba SD-6100KU2 Owner's Manual page 31

View Mode
DVD
The user may select one of the following options:
Fill: Fill the screen with decoded image.
Original: Display image as it original size. "Original" is
preferred for Jpeg viewing.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
View Mode.
4) Press ENTER
Aspect Ratio
button, then use
the / button to
Video out
select the options
(Fill, Original, Auto HDMI Resolution
Fit or Pan Scan).
JPEG Interval
5) Press ENTER
button.
6) Press SETUP
button to exit the menu.
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fill your TV screen. Either or both sides
of the picture are cut off.
Auto Fit
Automatically fit the decoded image on
screen without distortion. Black bars will
be present on top/bottom or left/right of
screen.
Note: Depending on the DVDs, you may not be able to view
the mode as selected.
Video Output
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
Video Out.
4) Press ENTER button, then use the / button to select
the output mode (Component, S-VIDEO, P-Scan or HDMI).
5) Press ENTER
button.
Aspect Ratio
6) Press SETUP
button to exit the
menu.
Video out
Component:Select if
HDMI Resolution
you connect the DVD to
JPEG Interval
your TV which has
component video
inputs.
S-VIDEO: Select if you
connect the DVD to your TV via S-video input.
P-Scan: Select if you connect the DVD to your TV which has
component video inputs that support progressive scan.
HDMI: High Definition Multimedia Interface. Select if you connect
the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
HDMI Resolution.
4) Press ENTER button, then use the
select the options
(Auto, 480p/576p,
720p, 1080i or
1080p).
5) Press ENTER
button.
6) Press SETUP
button to exit the
: 4 : 3
menu.
Notes
• Supported HDMI JPEG Mode:
Auto, 480p/576p, 720p, 1080i and 1080p.
• If the Video Output is not set to "HDMI", you cannot select
the "HDMI Resolution".
JPEG Interval
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
JPEG Interval.
4) Press ENTER button, then use the
and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off: Plays back one file at a time.
5 seconds: Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
: 4 : 3
: Auto Fit
S-VIDEO
P-Scan
HDMI
Audio
/ button to select
/ button to
Aspect Ratio : 4 : 3
: Auto Fit
Auto
Video out
480p/576p
HDMI Resolution
720p
1080i
JPEG Interval
1080p
/ button to select
/ button to shift
Aspect Ratio : 4 : 3
: Auto Fit
: 480P/576P
Video out
Off
HDMI Resolution
5 seconds
JPEG Interval
10 seconds
15 seconds
: PCM
: Off
31