Basic Playback; Playing A Disc - Toshiba SD-6100KU2 Owner's Manual

Basic playback

Playing a Disc

This section shows you the basics on how to play a disc.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input
connected to the DVD player.
1 Press ON/STANDBY.
ON/STANDBY
The DVD player turns on.
2
Press OPEN/CLOSE.
The disc tray opens.
3
Place the disc on the disc tray.
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the DVD
player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
4
Press OPEN/CLOSE to close the disc tray.
Playback starts.
If you insert a DVD that contains a top menu, a
menu may appear. Use
title you want to view, then press ENTER to start
playback.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Notes
• If the disc tray is holding a disc you have already played,
playback will begin from the location where you last stopped.
For resuming playback, see .
17
• Some video CD are recorded with PBC (Playback Control), a
menu with recorded contents may appear on the TV if you
have turned the PBC on. You can make your selection
according to its PBC menu. Press the PBC button on the
remote control to turn PBC on or off anytime during Video CD
playback. When switching from PBC off to PBC on mode,
playback will start from the beginning of the disc. To turn on the
menu display again, press the RETURN button.
16
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVDs.
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To stop playback
With the playback side
Press STOP.
down
To remove the disc
Press OPEN/CLOSE.
to select the
/ / /
Be sure to press the OPEN/CLOSE button to close the
disc tray after you remove the disc.
To turn the power off
Press ON/STANDBY to turn the unit off.
Notes
• Do not move the DVD player during playback. Doing so may damage
the disc.
• Use the OPEN/CLOSE button to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause
the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than
discs on the disc tray. Doing so may cause the DVD player to
malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image
onto its screen. To avoid this, be sure to press the STOP button
on your remote control once the movie is completed.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
Remove the disc after the disc tray
opens completely.