Toshiba SD-4800N Owner's Manual page 55

Audio
PCM Down Sampling
Analog Output
Digital Output
Dynamic Range Control
Karaoke Vocal
PCM Down Sampling
Make this selection only when you use your audio
equipment (e.g. receiver) connecting to the DVD
player via the BITSTREAM/PCM (DIGITAL) AUDIO
OUT jack.
According to performance of your connected receiver,
select a sound processing option for playback of a
disc that contains high frequency signals (sampling
frequency 96 kHz or 88.2 kHz).
Off: Select when your connected receiver processes
high frequency signals of 88.2 kHz or higher.
The DVD player outputs these signals as they
are on the disc.
On: Select when your connected receiver does not
process high frequency signals of 88.2 kHz or
higher.
The DVD player outputs these signals in a disc
depressing the frequencies to 48 kHz or 44.1
kHz.
Notes
• Regardless of this setting, high frequency signals on a
DVD disc are down-converted to 48 kHz or 44.1 kHz if
that disc is copy protected, and signals of 176.4 kHz or
192 kHz on a disc with no copyright protection are
down-converted to 88.2 kHz or 96 kHz.
• If you select "Off" because your connected receiver
does not process high frequency signals of 88.2 kHz or
higher, you will not hear output sound from those
signals.
Off
Stereo
Bitstream
On
Off
DVD-V DVD-A
Analog Output
DVD-V DVD-A
To select the output format of analog signal
corresponding to your system connection.
For details of sound recording systems, see
Stereo: Select when making a connection via
the analog audio output (L/R) jacks.
18
Multi: Select when making a connection via
the 5.1ch analog audio output jacks.
23
The next screen will detail the
appropriate settings.
Note
When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select "Stereo."
When you select "Multi":
Make the following settings for the built-in 5.1ch
surround decoder.
Pro Logic
C. S. Speaker Size
C (Center) Speaker
S (Surround) Speaker
Subwoofer
Center Channel Delay
Surround Channel Delay
Test Tone
Return
1) Select an item by pressing the
and press the ENTER button.
2) Make the settings (see below) by pressing the
/ / / buttons, and press the ENTER
button.
Pro Logic
Off: Dolby Surround Pro Logic is disabled.
On: Dolby Surround Pro Logic functions.
C. S. Speaker Size
Small: When the center speaker or surround
speakers cannot reproduce low frequency
signals below 120 Hz.
Large: When the center speaker and surround
speakers can reproduce low frequency
signals below 120 Hz.
VCD CD
.
43
Off
Large
On
On
On
0msec
5msec
/ buttons,
(Continued)
59