Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 14AF42 Owner's Manual

Adding channels to the TV's memory

Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press or
selection is highlighted.
3. Press or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press to select CH PROGRAM.
5. Press or
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED
(channel or cable number)" appears.
7. Press Channel

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
to display the SET UP menu.
3. Press or
ERASE.
4. Press or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.

Changing channels

To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or – on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
3L00301A P12-21 12
or to display the SET UP menu.
until the TV/CABLE
to highlight either
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
to start channel programming. The TV will automati-
or to view the programmed channels.
or
PICTURE AUDIO
to highlight ADD/
TV / CABLE
CH PROGRAM
to select ADD or
ADD / ERASE
SELECT
POWER
1
CH
4
SET UP OPTION
TV CABLE
7
START
ADD
VOL
–
ADJUST
EXIT RECALL TV/VIDEO
RESET CAP/TEXT
CODE
POWER
1
4
7
CH
SET UP OPTION
VOL
–
TV
START
ADD ERASE
EXIT RECALL TV/VIDEO
ADJUST
RESET CAP/TEXT
CODE
12
14/2/2002, 18:59
TV VCR CABLE
CH RTN
ENT
2 3
100
5 6
8 9 0
CH +
Channel +/–
VOL
+
MENU/
ENTER
Menu
CH –
FAV
Exit
1/2 FAV
MTS SLEEP MUTE
TV VCR CABLE
CH RTN
2 3 ENT
Channel
5 6 100
Numbers
0
8 9
CH +
Channel +/–
VOL
+
MENU/
ENTER
Menu
CH –
FAV
Exit
1/2
FAV
MTS SLEEP MUTE