Playback Procedure - Toshiba MW20FN1 Owner's Manual

Basic playback (DVD)

Playback procedure

Illustration of MW20FN1/R
DVD
Playback procedure
VCD
CD
1
Press OPEN/CLOSE on the unit.
The disc tray will open.
OPEN/CLOSE
2 Place a disc onto the tray.
Position it with the printed label side up, align it
with the guides, and place it in its proper position.
3
Press OPEN/CLOSE on the unit or PLAY on
the unit or the remote control.
• The disc tray closes automatically.
On the TV screen, "
"
OPEN/CLOSE
commences.
PLAY
A menu screen will appear on the
•
TV screen, if the disc has a menu
feature.
4
Press / or
ENTER
50
" changes to
" and then playback
/ to make a selection.
AUDIO
PHONES VIDEO L/MONO R REW STOP/EJECT PLAY FF REC/OTR CHANNEL OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP
POWER REC/OTR TIMER REC
LINE IN 2
OPEN/CLOSE
5
Press ENTER.
ENTER
6
Press STOP to end playback.
PLAY
STOP
7
To stop the playback, press STOP.
Then press OPEN/CLOSE on the unit.
The disc tray opens.
Remove the disc then press POWER.
STOP
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region
Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. If these appear, check
your disc again (see pages 8 and 59).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the
wrong way up) and press PLAY or OPEN/CLOSE on the unit,
" " will appear on the display for about 5 seconds and then
"No Disc" or "Incorrect Disc" will be displayed.
• Some playback operations of DVDs may be intentionally fixed
by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some
playback features may not be available. Also refer to the in-
structions supplied with the DVDs.
POWER
Title is selected and play commences.
The unit memorizes the stopped point,
depending on the disc. " " appears on
the screen. Press PLAY to resume
playback (from the scene point).
If you press STOP again or unload the
disc (" " appears on the screen.), the
unit will clear the stopped point.
The disc tray closes automatically and
unit turns off.
OPEN/CLOSE
7
3,6
6,7
5
4
POWER