Setting Channels Automatically; Tuner Setting - Toshiba MW20FN1 Owner's Manual

TV operation

Tuner setting

This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit's memory. In addition to normal
VHF and UHF channels, this unit can receive up to 113 Cable TV
channels. To use this unit with an antenna, set the TV/CATV menu
option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
TV/CATV selection
Preparation:
• Press TV/VCR to select the TV/VCR mode.
1
Press MENU. Press
then press ENTER.
MENU
SETUP
ENTER
2
Press or to select "TV/CATV".
ENTER
3 Press ENTER to select the "TV" or "CATV".
The arrow indicates the selected mode.
ENTER
TV - VHF/UHF channels
CATV - CABLE TV channels
4
Press MENU repeatedly until the menu screen
is cleared.
MENU
SETUP
Notes:
• If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.
• You can't select "CH SETUP" if you set the channel to
"LINE1" or "LINE2".
26
or to select "CH SETUP",
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈 / /ENTER/MENU〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈 / /ENTER/MENU〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈 / /ENTER/MENU〉

Setting channels automatically

1
Press MENU. Press
then press ENTER.
MENU
SETUP
ENTER
2
or
Press to select "AUTO CH MEMORY".
ENTER
3
Then press ENTER.
The unit will begin memorizing all
the channels available in your
area. Channel numbers will
remain red until auto memorizing
is complete.
ENTER
4
Press MENU repeatedly until the MENU screen
is cleared.
MENU
SETUP
1,4
1,3
1-2
or to select "CH SETUP",
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈 / /ENTER/MENU〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
/ /ENTER/MENU
á ñ