Connecting To Optional Equipment; Connecting To An Audio System - Toshiba MW20FN1 Owner's Manual

Connections

Connecting to optional equipment

Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
You can enjoy the TV game, camcorder or high quality dynamic sounds of DVD video discs or audio CDs by connecting
the unit to optional audio equipment.
Connecting a camcorder or a TV game
Select "LINE 2" using the INPUT SELECT button.
Signal flow
Illustration of MW20FN1/R
AUDIO
PHONES VIDEO L/MONO R REW STOP/EJECT PLAY FF REC/OTR CHANNEL
LINE IN 2
(yellow)
To AUDIO (L/R)/VIDEO IN
(white)
(red)

Connecting to an audio system

Connect the unit to your audio system.
Notes:
• Refer to the owner's manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away
from the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the unit's power cord. If you leave the amplifier power on, the
speakers may be damaged.
16
Audio/Video cable (not supplied)
OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP
POWER REC/OTR TIMER REC POWER
(LINE IN 2)
To ANALOG AUDIO OUT
(white)
OUT PUT LINE 1 IN
VHF/UHF
VIDEO VIDEO
DIGITAL AUDIO
L
L (MONO)
COAXIAL
AUDIO AUDIO
R R
(red)
To AUDIO (L/R)/VIDEO OUT
(yellow)
(white)
(red)
Audio cable (not supplied)
Camcorder
OR
TV GAME
Audio system
(white)
(red)
To audio inputs of the amplifier