Table of Contents
Advertisement
8.4.11 Max. Power (Infeed Limiting)
These parameters are set according to the
requirements of the selected country. Changing
these parameter settings can invalidate the type
approval of the unit. Change this setting only
after consultation with Delta customer service.
Overview
This function allows you to set the maximum active power fed
into the grid.
Setting options
Parameter
Max. Power
Menu item path
Main Menu > Install Settings > Max. Power
Setting the maximum active power
1 0 . N o v 2 0 1 9 1 5 : 3 2
S t a t u s :
O n G r i d
P o w e r :
E - T o d a y :
I n v e r t e r I n f o .
G e n e r a l S e t t i n g s
I n s t a l l S e t t i n g s
A c t i v e / R e a c t i v e P w r
F R T
W a r n i n g :
A d j . w o u l d a f f e c t
e n e r g y p r o d u c t i o n .
P a s s w o r d
0 * * *
E P O :
N o r m a l C l o s e
A C C o n n e c t i o n
A n t i - i s l a n d i n g :
M a x . P o w e r
1 0 5 0 0 W
R e t u r n t o F a c t o r y
Installation and Operation Manual for Power Inverter RPI M6A M8A M10A EU V4 EN 2020-07-13
Description
Limits the maximum power that can be fed into the grid.
1.
When the default information is displayed, press any button to open the main menu.
Otherwise, press the
0 W
0 k W h
2.
Use the
press the
ENT
3.
This function is protected with password 5555.
Use the
Press the
ENT
3 P 4 W
4.
Use the
O N
→ If the shape of the arrow changes
The currently set value is displayed after the entry.
5.
Use the
button repeatedly until the main menu is displayed.
ESC
and
buttons to select the Installation Settings entry and then
button.
and
buttons to set the individual numerals.
button to confirm a numeral.
and
buttons to select Max. Power and then press the
and
buttons to configure the value and then press the
"Installation settings" menu area
Setting range
0 .. P
MAX
, the value can be changed.
8 Settings
button.
ENT
button.
ENT
101
Advertisement
Table of Contents
