Code
5C
dC
OC
LC, LC1
3C
UC
WD80TA046BE_04200B-03_EN(Indicative).indd 57
Water is not draining.
•
Make sure the drain hose is not frozen or clogged.
•
Make sure the drain hose is positioned correctly, depending on
the connection type.
•
Clean the debris filter as it may be clogged.
•
Make sure the drain hose is straightened all the way to the
drain system.
•
If the information code remains, contact a customer service
centre.
Operating the washer with the door open.
•
Make sure the door is properly closed.
Make sure laundry is not caught in the door.
•
Water has overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Check the Motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
Action
English 57
2021/2/24 14:58:24