Toshiba 50L2200U User Manual page 25

Connecting a Blu-ray™/DVD Player with ColorStream
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
❖
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has
HDMI
to the HDMI® input" on page
NOTE
When you use ColorStream
appropriately.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream
input source on the TV.*
To view satellite programs using the component video
connections:
Turn ON the satellite receiver. Select the ColorStream
input source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select
the ColorStream
DVD.
*To select the video input source, press the INPUT button on the
remote control, see
NOTE
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
®
video, see "Connecting an HDMI® or DVI device
®
HD video input source on the TV* to view the
"Selecting the video input source" on page
Connecting Your TV
26.
®
HD or Video, switch AV input mode
25
®
®
HD video
®
HD video
55.