Selecting Stereo/Sap Broadcasts - Toshiba 50L2200U User Manual

2 Highlight Digital Audio Selector, and then press the ENTER
button.
(Sample Illustration) Sound menu - Digital Audio Selector selection
3 Press the ( /
the ( /
4 Press the EXIT button.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, an icon or word
"SAP" appears when the INFO button is pressed. The MTS feature
is only available for analog signals on the ANT/CABLE input.
To listen in stereo sound:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the MTS field, select Stereo.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
NOTE
arrow) buttons to select Audio, and then press
arrow) buttons to select the desired service.
❖
You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
❖
If the sound is noisy, select Mono to reduce the noise.
Using the TV's features
Adjusting the audio
79