Chapter 6: Basic Features; Tuning Channels; Setting The Channel Tuning Mode; Tuning To The Next Programmed Channel - Toshiba 46VX700U Owner's Manual

Tuning channels

Setting the Channel Tuning Mode

You can select how tuning is handled for analog and
digital channels when the TV is in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (- p. 28).
Y > SETUP > TV Settings >
1
2
Press B or b to highlight Channel Tuning Mode.
Mode Description
You can tune both analog and digital
Standard
channels normally.
Digital channels have priority when
manually entering a channel number
Auto
using the 0-9 buttons on the remote. To
(default)
tune analog channels, use < / , if
available.
Digital You can only tune digital channels.
Press C or c to select a mode. Press O.
3
Note: The Channel Options screen and the Channel
Browser ANT/CABLE List update when you change the
mode. The History List clears, but the Favorites List is
saved.
Tuning to the next programmed
channel
Press < or , on the remote control or TV control panel.
Note: This feature does not work unless you store
channels in the TV's channel memory (- p. 28).
Tuning to a specific channel
(programmed or unprogrammed)
Channel Description
Press the 0–9 buttons on the remote
control. (For example, to select
Analog
channel 125, press 1, 2, 5.) Press
Press the 0–9 buttons on the remote
control to enter the major channel
number. Press the dash (=) button.
Digital
Enter the sub-channel number. (For
example, to select digital channel 125-
1, press 1, 2, 5, –, 1.) Press

Chapter 6: Basic features

.
O K
.
OK
.
OK

Using the Channel Browser

™
The Channel Browser is a helpful navigational
interface for all of your channels and inputs.
Features:
•Navigate the contents of all of your inputs.
•Keep a list of your favorite channels.
•Keep a history of the last 32 channels or inputs
viewed.
•Quickly surf and tune your recently viewed channels/
inputs from the Channel Browser
•Surf via Browse mode (to immediately tune channels
as you highlight them in the Channel Browser
Select mode (to surf channels in the

Channel Browser

™ before you select one to tune).
•Quickly change inputs from the Inputs List.
•Quickly select REGZA-LINK
REGZA-LINK List.
To set up the Channel Browser
Y > PREFERENCES > Channel Browser Setup
1
> .
O K
2
Press b or B to highlight Navigation.
3
Press C or c to select Select Mode or Browser
Mode.
4
Select a list.
History List
•
• ANT/CABLE List
• Inputs List
• Favorites List
• REGZA-LINK List
Note:
• History List will be cleared every time the TV is
powered off.
• REGZA-LINK List will be automatically not available
and set to off when Enable REGZA-LINK is set to Off
(- p. 40).
5
Select On or Off.
6
To return to factory defaults, highlight Reset and
press .
O K
To open the Channel Browser
•Y > APPLICATIONS > Channel Browser >
•Press , and select Channel Browser.
•Press .
™
™
History List.
™
) or
®
devices from the
™
:
™ :
.
O K
31