Manual Tuning; Skipping Channels; Skipping Video Inputs - Toshiba 46VX700U Owner's Manual

Option Description
Note: If you select Cable, auto tuning
deletes previously stored channels from
memory.
Cable
This setup requires some time, but you
do not need to repeat the setup unless
your cable TV service's lineup changes
significantly.
Auto tuning retains stored channels and
stores newly found channels into
memory.
Antenna
To skip an antenna source channel from
memory, set the channel to be skipped.
See "Skipping channels".
Note: To tune to channels not stored in memory, use
buttons 0–9 and = on the remote control.
Y > SETUP > Auto Tuning >
1
A confirmation screen appears.
to start Auto Tuning or O to abort.
2
Press
O K
The TV cycles through all the channels, and stores
all active channels in memory.
To view the programmed channels, press < or ,.

Manual Tuning

After storing channels in memory, you can manually
enter channels if the physical channel is known.
Y > SETUP > Manual Tuning >
1
2
Use buttons 0–9 on the remote control to enter the
channel number (for example, 56) and press
3
Press to start Manual Tuning.
O K
The channels found are listed at the bottom of the
screen.
Type Description
ATV Analog channel.
DTV Digital channel
Chapter 5: Setting up your TV

Skipping channels

To prevent a channel from being viewed, you can set it
to be skipped.
1
2
.
O K
3
Note: You cannot tune to skipped channels using < or ,.
Use buttons 0–9 and = on the remote control.

Skipping video inputs

You can set video inputs to be skipped over when
selecting inputs in the Input selection window.
.
O K
To turn on skip:
1
.
OK
2
3
To turn off skip:
1
2
3
Y > SETUP > TV Settings >
Press B or b to select Channel Options. Press
The list of channels appears.
Channel Options
Ch. Type
5-1 DTV
6
ATV
6-1 DTV
8
ATV
9
ATV
10 ATV
11 ATV
12 ATV
Press B or b to select a channel to skip. Press
The box is selected. To clear the selection, press
Y > PREFERENCES > AV Connection >
Press B or b to select Input Labeling. Press
Press B or b to select the item you want to be
skipped. Press the RED button to turn on Skip.
Y > PREFERENCES > AV Connection >
Press B or b to select Input Labeling. Press
Press B or b to select the skipped item. Press the
RED button to turn off Skip.
.
O K
.
O K
.
O K
.
O K
.
O K
.
O K
.
O K
.
O K
29