Using Mpeg Noise Reduction; Selecting The Color Temperature - Toshiba 42HL196 Operating Manual

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
("grayed out").
To select the MPEG noise reduction level:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Game Mode
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
54
Chapter 6: Using the TV's advanced features
ANT 1
On
Auto
Low
Cool
Off
Done

Selecting the color temperature

You can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
Mode Picture Quality
cool blueish
medium neutral
warm reddish
To select the color temperature:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Game Mode
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference in the Picture Settings menu.
ANT 1
On
Auto
Low
Cool
Off
Done