Full picture size (for 16:9 [480i, 480p] source
programs only)
If receiving a squeezed 4:3 format program, the picture is
•
stretched wider to fill the width of the screen, but not
stretched taller.
None of the picture is hidden.
•
Native picture size (for 1080i signal programs)
If receiving a 1080i signal program, the Native mode
•
displays the full picture without scaling.
When receiving a signal in any format other than 1080i, the
•
Native mode will be grayed out in the Picture Size screen.
Note:If you select one of the TheaterWide
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing the
program in Full or Natural picture size.
36
Chapter 5: Using the TV's features
Full picture size example
Native picture size example
®
picture sizes, the
Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press Y and open the Video menu.
2
Highlight Theater Settings and press T.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate
ENTER
Select
3
In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4
Press b to highlight the Picture Scroll field.
5
Press C or c to scroll the picture up and down as needed,
from –10 to +20.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Auto Aspect Ratio
Reset
6
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
®
picture
CH RTN
Back
EXIT
Exit
TheaterWide 2
-5
Film
On
Done