Setting The Hdmi ™ Audio Mode - Toshiba 42HL117 Owner's Manual

3
Press BbC c to highlight No Label and press T.
Channel Labeling
{No Label}
A&E
ABC
ABCFAM
ABCHD
AMAX
AMAXW
AMC
ANIMAL
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and press T.
If the desired channel label is not available from the list of
presets, you can create a custom label.
To create and assign a custom label:
1
Open the Channel Labeling window.
2
Press < or , to select a channel you want to label.
3
Press Bb c to highlight Custom and press T.
The software keyboard will appear.
Channel Labeling
{No Label}
ANT
24
A&E
A&E
ABC 1 1
Press CH UP/DOWN to
ABCFAM 4 G H I g h i 4
change channels.
7
P Q R S p q r s 7
ABCHD
_
Backspace
100
AMAX
AMAXW
AMC Clear All
ANIMAL Done
4
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
5
The highlighted character is entered after you either press
a different key, press c key, or after a two-second pause.
6
Repeat steps 4 and 5 until you have entered all desired
text.
7
When finished, press T.
8
(New labels will be added to the list in alphabetical order
and marked with an icon
custom.) Highlight the new custom label and press T to
assign. Assigned channel labels will be displayed in the
banner, Channel Add/Delete window, and Channels
Block window.
To delete the custom label:
1
Open the Channel Labeling window.
2
Highlight the label to be deleted and press =.
Chapter 5: Setting up your TV
ANT
24
Press CH UP/DOWN to
change channels.
Custom
Clear All
Done
Edit CH RTN Cancel Send EXIT Exit
2 A B C a b c 2 3 D E F d e f 3
5 6 M N O m n o 6
J K L j k l 5
8 9
T U V t u v 8 W X Y Z w x y z 9
0 0 INPUT Space
to indicate that they are
3
Highlight Yes from the deletion confirmation window
and press T.
Channel Labeling
TIMES
ANT
24
TLC
TMC
Delete the selected custom label?
Press CH UP/DOWN to
TMCX
change channels.
TMCXw
TMCw
TNT Custom
TNTHD Clear All
TOCDEFG Done
4
Highlight Done and press T to save changes, and go
back to the Channel Labeling window.
Setting the HDMI
To set the HDMI audio mode:
1
Press Y and open the Audio menu.
2
Highlight Audio Setup and press T.
3
Press B or b to select HDMI 1 Audio and then press
C or c to select the HDMI 1 audio mode (Auto, Digital,
or Analog). (Auto is the recommended mode.) See
"Connecting an HDMI or DVI device to the HDMI input"
(- page 18).
Audio Setup
PC Audio
HDMI 1 Audio
MTS
Language
Optical Output Format
Dolby Digital
Dynamic Range Control
Reset
Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to "No," the
HDMI 1 Audio setting changes to "Auto." If PC Audio is set to
"Yes," the HDMI 1 Audio setting is set to "Digital" and is
grayed out in the menu. (Also see item 4 on page 12 and
"Setting the PC Audio" on page 54.)
No Yes
™
audio mode
No
Auto
Stereo
English
Dolby Digital
Compressed
Done
33