Setting The Hdmi 3 Audio Mode; Connecting A Computer - Toshiba 40TL20 Series Owner's Manual

AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
Digital Audio Output
3
Press or to select PC/HDMI 3 Audio
and press or to select PC or HDMI3.

Setting the HDMI 3 Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from
three modes:
Auto, Digital or Analogue.
Note:
This function is available only when the
PC/HDMI 3 Audio mode is set to HDMI3.
1
From the AV Connection menu, press
to select HDMI 3 Audio.
2
Press or to select Auto, Digital or
Analogue.

Connecting a computer

To connect a PC to the RGB/PC terminal on
the TV:
An analogue RGB (15 pin) computer cable can
be connected.
Audio cable
for PC-to-TV
connection
Computer
Conversion
adapter
(if necessary)
Connect a PC cable from the computer to the
o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
VGA: VESA 640 × 480 @ 60/72/75 Hz
S-VGA: VESA 800 × 600 @ 56/60/72/75 Hz
XGA: VESA 1024 × 768 @ 60/70/75 Hz
W-XGA: VESA 1280 × 768 @ 60/75 Hz
Connecting your TV
PC
Digital
Auto
Notes:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
• There is no need to use an adapter for
• A bar may appear in the upper, lower, right or
• If the edges of the picture are stretched,
or
• Depending on the specifi cation of the PC you
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on
the TV, use an HDMI-to DVI adapter cable and
analogue audio cables.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). Separate
analogue audio cables are not necessary.
TV back view
Mini D-sub
15 pin
RGB PC cable
Notes:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
W-XGA: VESA 1360 × 768 @ 60 Hz
S-XGA: VESA 1280 × 1024 @ 60/75 Hz
1920 × 1080p @ 60Hz (Horizontal Frequency:
67.5 kHz (H), Pixel Clock Frequency: 148.5 MHz)
particular, the PC signal may not be detected
correctly.
computers with DOS/V compatible mini D-sub
15 pin terminal.
left side of the screen, or parts of the picture
may be obscured depending on some signals.
This is not the malfunction.
readjust the picture position adjustments in the
PC Settings menu.
are playing the DVD-Video on, and the DVD's
title, some scenes may be skipped, or you
may not be able to pause during multi-angle
scenes.
TV back view
Computer
particular, the PC signal may not be detected
correctly.
Audio cablefor
PC-to-TV
connection
33