Disabling Or Enabling The Dual Pointing Device - Toshiba S3 User Manual

70
Getting Started
Using the Toshiba Dual Pointing Device
mouse button. Check your program's documentation to
determine if it uses the right mouse button.

Disabling or enabling the Dual Pointing Device

The Dual Pointing Device is enabled by default. To change
the enable/disable Dual Point setting:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Printers and Other Hardware.
3 Click Mouse Properties.
The Mouse Properties window appears.
4 Click the Dual Pointing Device tab.
The Dual Pointing Device tab view window appears.
5 Select Disable or Enable, whichever is appropriate.
6 Click Apply.
7 Click OK.
The Mouse Properties window closes.
8 Close the Printers and Other Hardware window.
9 Close the Control Panel window.
You can also use a hot key to disable or enable the Dual
Pointing Device. See
Pointing Device" on page 305
"Disabling or enabling the Dual
for more information.