Table of Contents
Advertisement
Setting up a printer
NOTE
If your printer does not support Plug and Play, follow these steps to
set it up for the first time. You only need to set up the printer once.
1
Click Start, Control Panel, Hardware and Sound, and then
under Printers, click Add a printer.
The Add Printer Wizard appears.
(Sample Image) Add Printer Wizard
2
Follow the on-screen instructions to set up your printer.
Connecting an optional external diskette drive
Some operations, such as creating a password service diskette,
require a diskette drive designed for use with 3.5-inch diskettes.
(Sample Illustration) Optional external USB diskette drive
Connecting an optional external diskette drive
Some printers require a specific installation process. Refer to your
printer installation guide for instructions before completing the
following procedure.
Getting Started
75
Advertisement
Table of Contents
