Table of Contents
Advertisement
102
Learning the Basics
Using the optical drive
Inserting an optical disc
To insert an optical disc into the drive:
1
Make sure the computer is turned on.
The drive will not open if the computer's power is off.
2
Make sure the drive's in-use indicator light is off.
3
Press the drive's eject button.
The disc tray slides partially out of the drive (about 1 inch).
4
Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5
Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in
discs" on page
6
Place the disc carefully in the disc tray, label side up.
(Sample Illustration) Positioning the disc in the drive
105.
"Caring for optical
Advertisement
Table of Contents
