Table of Contents
Advertisement
13
Once the module's connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should "snap" into place securely with the corresponding
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps 12-13.
latch
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
(Sample Illustration) Inserting the memory module into the slot
14
Replace the memory module slot cover and secure it using the
screw.
15
Re-insert the main battery. For more information on inserting
the main battery, see
16
Turn the computer right side up.
17
Reconnect the cables.
18
Restart the computer.
Getting Started
Adding memory (optional)
latch
"Inserting a charged battery" on page
Back of computer
53
111.
Advertisement
Table of Contents
