Table of Contents
Advertisement
54
Getting Started
Adding memory (optional)
NOTE
NOTE
11
Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector's notch with the matching key in the
socket.
notch
latch
key
(Sample Illustration) Aligning the memory module into the socket
12
Firmly press the memory module into the memory slot's socket
at approximately a 30-degree angle (to the horizontal surface
of the computer).
(Sample Illustration) Inserting the module into the socket
13
Once the module's connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should "snap" into place securely with the corresponding
If your system has the memory modules stacked on top of one
another, you must remove the top module first before removing/
installing the bottom module.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
connector
latch
Advertisement
Table of Contents
