Table of Contents
Advertisement
158
Exploring Your Computer's Features
Using the Bridge Media Adapter Slot
Inserting memory media
The following instructions apply to all types of supported
media devices.
1
Turn the media so that the contacts (metal areas) are face
down.
2
Push the media into the adapter until it locks in place.
(Sample Illustration) Inserting memory media
Removing memory media
1
Prepare the media for removal by right-clicking the
Safely Remove Hardware icon on the system tray and
then selecting the card or device you want to remove.
If the system is unable to prepare the media for safe
removal, a message will tell you to try again later. If the
media can be removed now, the system displays Safe to
Remove Hardware.
2
Gently press the card inward to release it.
The card pops out slightly.
When inserting memory media, do not touch the metal
contacts. You could expose the storage area to static
electricity, which can destroy data.
Advertisement
Table of Contents
