Using The Remote Control - Epson EMP-713 Owner's Manual

Using the Remote Control

♦
Downloaded from:
Enter button
Esc button
To use the remote control, point it towards the remote
control receivers located at the front of the projector.
To be able to use the remote control as a cordless mouse,
connect the mouse cable to the projector and your computer.
You can use the remote control up to 10 metres (30 feet)
from the projector.
Note: The projector m ay not respond to rem ote control
com m ands in these conditions: am bient light is too bright; a
certain type of fluorescent light is present; a strong light source
(such as direct sunlight) shines into the infrared receiver; or
other equipm ent em itting infrared energy is present (such as a
radiant room heater). Correct these conditions to use the rem ote
control or control the projector from a com puter.
http://www.usersmanualguide.com/
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
Remote control
Controlling the Projector 35