Pre-Operation; Product Applications; Technical Specifications - Husky 934 631 Use And Care Manual

Pre-Operation

PRODUCT APPLICATIONS

You can use this digital level for the following applications:
Gradient, level, vertical measuring, and checking of floor, wall, ceiling in construction, decoration.
… …
Measuring, checking and maintenance in irrigation works, construction of bridges and roadways,
… …
manufacture of machines or parts, industry flat base, and others.
Locating antenna, communication equipment, and other fixtures.
… …

TECHNICAL SPECIFICATIONS

Power Supply
Measuring Range
Optimum Operating Temperature
Accuracy of Vials
Accuracy of Digital Display
Estimated Battery Life
DIGITAL LEVEL FEATURES
This digital level is a manual-leveling tool that can be used inside and outside for horizontal (level),
vertical (plumb), and square alignment projects. It comes fully assembled (Batteries are not included).
Please read and understand all instructions in this instruction manual before using the product.
Figure 1 and the list that follows describe the features of this level.
1. On/ /Off – Press and hold this button for two seconds to turn the level on. Turn the level off by pressing and
holding the button for about two seconds. The level will automatically shut off if left idle for five minutes. When
the level is turned on, push the button to activate and deactivate the beeper. The beeper will sound at level, 45°
angle, plumb and the last hold angle in the memory.
2. Hold – Push to "freeze" and "unfreeze" the display reading. It can also keep a record of the last reading.
7 3 8
9 4 5
Figure 1
2 "AAA" 1.5-Volt Batteries (not included)
0-360°
32° F to 104° F (0° C to 40° C)
±0.029° (level or plumb)
±0.1° (level or plumb), ±0.2° (all angles)
12 hours with alkaline batteries
1 7
6 2 9